MW-5000T

Air Crawler Drill with Rod Changer

This is an Air Track Drill with Rod Changer, perfect for quarries, mining and civil jobs, where durability and trust is required.

p_03-01-44_Foto_1
p_03-01-44_Foto_2
p_03-01-44_Foto_3
p_03-01-44_Foto_4
p_03-01-44_Foto_5
p_03-01-44_Foto_6
p_03-01-44_Foto_7
p_03-01-44_Foto_8
p_03-01-44_Foto_9
p_03-01-44_Imagem_01
p_03-01-44_Imagem_02
p_03-01-45_Imagem_03
p_03-01-45_Imagem_04
p_03-01-45_Imagem_05
p_03-01-45_Imagem_06


* Air consumption:  750 PCM

* Working pressure:  100 PSI / 7 bar

* Available models of drifters:  MW-120/121/126/131/140

* Cleaning:  Air or Water

* Weight:  5000kg

* Width (with dust collector):  2.800mm

* Width (with water tank):  2.500mm

* Length:  5.800mm

* Height:  2.600mm

* Feed motor, with high torque of 6cc and reduction feed with capacity of 7hp, using chain wing 100;

* Gear Hydraulic Pump, easier to maintain, driven by vane motor;

* Powerful tramming motor 5cc (11hp / 8,5kw) and hydraulic oscillating system permitting good mobility and traction even on rough terrain. The motors provide adequate power to climb slopes while towing a compressor;

* Disc Break, spring-applied, hydraulically-released disc breakers are equally effective in forward or reverse;

* Rollers with oil lubrication being a non maintenance part;

* Wheel guides avoiding derailment on tracks during the tramming;

* Hoses existing in our equipment are done for high pressure, with pressed fittings, avoiding leaking and increasing their working life;

* Auto Rod Change;

* Rods Greaser;

* Hydraulic Centralizer;

* Control used at the back of equipment;

* Drifter / Hammer Brake. Installed with Planetary Gear Box that allow it be completely stopped remaining in neutral feed position when breaking and avoid slides over the mast.

* Hour meter for the hammer;

* Dust Collector;

* Water flushing with (available for LS drifter series). This kind of flushing uses water injection when drilling, reducing dust;

* Bits Grinder;

* Air Grinder

+
Technical Features

* Air consumption:  750 PCM

* Working pressure:  100 PSI / 7 bar

* Available models of drifters:  MW-120/121/126/131/140

* Cleaning:  Air or Water

+
Dimensions

* Weight:  5000kg

* Width (with dust collector):  2.800mm

* Width (with water tank):  2.500mm

* Length:  5.800mm

* Height:  2.600mm

+
Design features of equipment

* Feed motor, with high torque of 6cc and reduction feed with capacity of 7hp, using chain wing 100;

* Gear Hydraulic Pump, easier to maintain, driven by vane motor;

* Powerful tramming motor 5cc (11hp / 8,5kw) and hydraulic oscillating system permitting good mobility and traction even on rough terrain. The motors provide adequate power to climb slopes while towing a compressor;

* Disc Break, spring-applied, hydraulically-released disc breakers are equally effective in forward or reverse;

* Rollers with oil lubrication being a non maintenance part;

* Wheel guides avoiding derailment on tracks during the tramming;

* Hoses existing in our equipment are done for high pressure, with pressed fittings, avoiding leaking and increasing their working life;

* Auto Rod Change;

* Rods Greaser;

* Hydraulic Centralizer;

* Control used at the back of equipment;

* Drifter / Hammer Brake. Installed with Planetary Gear Box that allow it be completely stopped remaining in neutral feed position when breaking and avoid slides over the mast.

+
Optionals

* Hour meter for the hammer;

* Dust Collector;

* Water flushing with (available for LS drifter series). This kind of flushing uses water injection when drilling, reducing dust;

* Bits Grinder;

* Air Grinder