MW-5000GL / MW-5000EGL
Air Crawler Drill
This version of equipment is able to work in diferent positions, specilly to make Radial Holes tha means 360º.
The equipment MW-5000GL and MW-5000EGL, have the same technical features than models MW-5000 and MW-5000E, plus Radial Hole. It’s possible to work with Top Hammer or Dow the Hole (DTH).
* Air consumption: 750 PCM
* Working pressure: 100 PSI / 7 bar
* Available models of drifters: MW-120/121/126/131/140
* Available model of rotation head: MW-80A
* Cleaning: Water
* Weigth: 5300kg / 5700kg
* Width: 2224mm
* Length: 5814mm
* Heigth: 1600mm
-
Feeed motor, with high torque of 6cc and reduction feed with capacity of 7hp, using chain wing 100;
-
Gear Hydraulic Pump, easier to maintain, driven by vane motor.;
-
Powerful tramming motor 5cc (11 hp / 8,5 kw ) and hydraulic oscillating system permitting good mobility and traction even on rough terrain. The motors provide adequate power to climb slopes while towing a compressor;
-
Disc Break, spring-applied, hydraulically-released disc breakers are equally effective in forward or reverse.;
-
Rollers with lubrification unnecessary over an working life. Oil lubrification;
-
Wheel guides, avoiding derailment on tracks during the tramming;
-
Hoses existing in our equipment are done for high pressure, with pressed fittings, avoiding leakings and increasing their util life;
-
Extension Boom (MW-5000EGL);
-
Control used at the back of equipment;
-
Hour meter for the hammer;
-
Water flushing (available for LS drifter series). This kind of flushing uses water injection when drilling, reducting dust;
-
Bits grinder;
-
Hydraulic centralizer;
-
Air grinder.
- + Technical Features
-
* Air consumption: 750 PCM
* Working pressure: 100 PSI / 7 bar
* Available models of drifters: MW-120/121/126/131/140
* Available model of rotation head: MW-80A
* Cleaning: Water
- + Dimensions
-
* Weigth: 5300kg / 5700kg
* Width: 2224mm
* Length: 5814mm
* Heigth: 1600mm
- + Design features of equipment
-
-
Feeed motor, with high torque of 6cc and reduction feed with capacity of 7hp, using chain wing 100;
-
Gear Hydraulic Pump, easier to maintain, driven by vane motor.;
-
Powerful tramming motor 5cc (11 hp / 8,5 kw ) and hydraulic oscillating system permitting good mobility and traction even on rough terrain. The motors provide adequate power to climb slopes while towing a compressor;
-
Disc Break, spring-applied, hydraulically-released disc breakers are equally effective in forward or reverse.;
-
Rollers with lubrification unnecessary over an working life. Oil lubrification;
-
Wheel guides, avoiding derailment on tracks during the tramming;
-
Hoses existing in our equipment are done for high pressure, with pressed fittings, avoiding leakings and increasing their util life;
-
Extension Boom (MW-5000EGL);
-
Control used at the back of equipment;
-
- + Optionals
-
-
Hour meter for the hammer;
-
Water flushing (available for LS drifter series). This kind of flushing uses water injection when drilling, reducting dust;
-
Bits grinder;
-
Hydraulic centralizer;
-
Air grinder.
-