MW-5000G / MW-5000EG

Air Crawler Drill

This kind of equipment ( JUMBO ) is recommended for opening and feed tunneling as underground mining, where durability and reliance are necessary. Offered in two models: MW-5000G and MW-5000EG ( Extendible Boom ).
These equipment ( JUMBOS ) as others from Wolf, are developed for high performance and versatility results, with low maintenance costs. Is possible to work in horizontal and vertical drilling with surface drifter ( top hammer ) or Down The Hole hammer ( DTH ).

p_01-01-12_Jumbo_3
p_01-01-12_Jumbo_6
p_01-01-12_Jumbo_10
p_09-06-28_aaa
p_10-20-51_Afiadora_de_bits_MWAB68
p_10-20-51_Esmeril_MWAB150
p_10-20-51_Horimetro
p_10-43-44_DSC02938
p_10-43-44_DSC02948

* Air consumption:  750 PCM

* Working pressure:  100 PSI / 7 bar

* Available models of drifters:  MW-120/121/126/131/140

* Available model of rotation head:  MW-80A

* Cleaning:  Water

* Weigth:  6000kg / 6400kg

* Width:  2250mm / 2510mm

* Length:  5600mm / 6500mm

* Heigth:  2520mm

Feed motor, with high torque of 6cc and reduction feed with capacity of 7hp, using chain wing 100;

  • Gear Hydraulic Pump, easier to maintain, driven by vane motor.;

  • Powerful tramming motor 5cc (11 hp / 8,5 kw ) and hydraulic oscillating system permitting good mobility and traction even on rough terrain. The motors provide adequate power to climb slopes while towing a compressor;

  • Disc Break, spring-applied, hydraulically-released disc breakers are equally effective in forward or reverse.;

  • Rollers with lubrication unnecessary over an working life. Oil lubrication;

  • Wheel guides, avoiding derailment on tracks during the tramming;

  • Hoses existing in our equipment are done for high pressure, with pressed fittings, avoiding leakages and increasing their working life.

  • Hydraulic centralizer;

Hour meter for the hammer;

  • Bits grinder;

  • Pneumatic grinder

  • +
    Technical Features

    * Air consumption:  750 PCM

    * Working pressure:  100 PSI / 7 bar

    * Available models of drifters:  MW-120/121/126/131/140

    * Available model of rotation head:  MW-80A

    * Cleaning:  Water

    +
    Dimensions

    * Weigth:  6000kg / 6400kg

    * Width:  2250mm / 2510mm

    * Length:  5600mm / 6500mm

    * Heigth:  2520mm

    +
    Design features of equipment

    Feed motor, with high torque of 6cc and reduction feed with capacity of 7hp, using chain wing 100;

    • Gear Hydraulic Pump, easier to maintain, driven by vane motor.;

    • Powerful tramming motor 5cc (11 hp / 8,5 kw ) and hydraulic oscillating system permitting good mobility and traction even on rough terrain. The motors provide adequate power to climb slopes while towing a compressor;

    • Disc Break, spring-applied, hydraulically-released disc breakers are equally effective in forward or reverse.;

    • Rollers with lubrication unnecessary over an working life. Oil lubrication;

    • Wheel guides, avoiding derailment on tracks during the tramming;

    • Hoses existing in our equipment are done for high pressure, with pressed fittings, avoiding leakages and increasing their working life.

    • Hydraulic centralizer;

    +
    Optionals

    Hour meter for the hammer;

  • Bits grinder;

  • Pneumatic grinder