MW-5000E

Air Crawler Drill

This is an Air Track Drill with Extensible Boom, perfect for quarries, mining and civil jobs, where durability and trust is required.

This agile and powerful equipment, with Extensible Boom, of high reach, can drills in difficult climbing, not acessable for other equipment. The extension is approximately 1,5m. Can works with top hammer or Dow the Hole Hammer (DTH).

p_09-35-25_MW5000E
p_09-35-26_boom_extensivo
p_10-14-23_Afiadora_de_bits_MWAB68
p_10-14-23_Coletor_de_Po
p_10-14-23_Esmeril_MWAB150
p_10-14-23_Horimetro

* Air consumption:  750 PCM

* Working pressure:  100 PSI / 7 bar

* Available models of drifters:  MW-120/121/126/131/140

* Available model of rotation head:  MW-80A

* Cleaning:  Air or Water

 

* Weigth:  5300kg

* Width:  2224mm

* Length:  5814mm

* Heigth:  1600mm

  • Feeed motor, with high torque of 6cc and reduction feed with capacity of 7hp, using chain wing 100;

  • Gear Hydraulic Pump, easier to maintain, driven by vane motor.;

  • Powerful tramming motor 5cc (11 hp / 8,5 kw ) and hydraulic oscillating system permitting good mobility and traction even on rough terrain. The motors provide adequate power to climb slopes while towing a compressor;

  • Disc Break, spring-applied, hydraulically-released disc breakers are equally effective in forward or reverse.;

  • Rollers with lubrification unnecessary over an working life. Oil lubrification;

  • Wheel guides, avoiding derailment on tracks during the tramming;

  • Hoses existing in our equipment are done for high pressure, with pressed fittings, avoiding leakings and increasing their util life;

  • Extension Boom 1,5m.

 

  • Control used at the back of equipment;

  • Hour meter for the hammer;

  • Dust collector;

  • Water flushing (available for LS drifter series). This kind of flushing uses water injection when drilling, reducting dust;

  • Bits grinder;

  • Hydraulic centralizer;

  • Air grinder.

+
Technical Features

* Air consumption:  750 PCM

* Working pressure:  100 PSI / 7 bar

* Available models of drifters:  MW-120/121/126/131/140

* Available model of rotation head:  MW-80A

* Cleaning:  Air or Water

 

+
Dimensions

* Weigth:  5300kg

* Width:  2224mm

* Length:  5814mm

* Heigth:  1600mm

+
Design features of equipment
  • Feeed motor, with high torque of 6cc and reduction feed with capacity of 7hp, using chain wing 100;

  • Gear Hydraulic Pump, easier to maintain, driven by vane motor.;

  • Powerful tramming motor 5cc (11 hp / 8,5 kw ) and hydraulic oscillating system permitting good mobility and traction even on rough terrain. The motors provide adequate power to climb slopes while towing a compressor;

  • Disc Break, spring-applied, hydraulically-released disc breakers are equally effective in forward or reverse.;

  • Rollers with lubrification unnecessary over an working life. Oil lubrification;

  • Wheel guides, avoiding derailment on tracks during the tramming;

  • Hoses existing in our equipment are done for high pressure, with pressed fittings, avoiding leakings and increasing their util life;

  • Extension Boom 1,5m.

+
Optionals

 

  • Control used at the back of equipment;

  • Hour meter for the hammer;

  • Dust collector;

  • Water flushing (available for LS drifter series). This kind of flushing uses water injection when drilling, reducting dust;

  • Bits grinder;

  • Hydraulic centralizer;

  • Air grinder.